Enviro-Grip™ EP#1 is a two component, low odor, liquid applied, epoxy-polyamine primer with unique penetrating characteristics. This primer is recommended for use on concrete, plywood and other heavy traffic areas. Use in indoor or outdoor applications. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product.
Download Tech SheetEnviro-Grip™ EP#2/EP#2SC is a two component, liquid applied, solvenated, epoxy-polyamine primer with unique penetrating characteristics. This primer is recommended for metal flashings and other medium to heavy-duty-traffic areas in outdoor applications. Two versions of this primer can be used: Enviro-Grip™ EP#2 at 250 VOC and Enviro-Grip™ EP#2SC at 100 VOC. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product.
Download Tech SheetEnviro-Grip™ PUR#5/PUR#5SC is a single component, liquid applied, aromatic, urethane-polyurea primer. This primer provides good intercoat adhesion. Enviro-Grip™ PUR#5SC is designed for use in Southern California to be in compliance with SCAQMD air quality standards. This primer is recommended for outdoor and light-duty traffic areas. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product.
Download Tech SheetEnviro-Grip™ PUR#555 is a two component, low odor, liquid applied, intercoat primer for polyurethane and polyurea coatings. This primer provides good inter-coat adhesion. Enviro-Grip™ PUR#555 is recommended for indoor or outdoor and light duty or heavy-traffic areas. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/ codes at the place of installation of product.
Download Tech SheetEnviro-Grip™ EBF-LV is a two component, high solids, liquid applied, epoxy-polyamine filler surfacer with the unique characteristic of sealing pores in concrete. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product.
Download Tech SheetEnviro-Grip™ Primer WBs is a three component (resin, hardener, and water), fast drying, waterborne, epoxy primer with low VOC and low odor. For use on concrete, wood, modified bitumen, and asphalt. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product.
Download Tech SheetEnviro-Grip™ 404FC is a one coat, alkali resistant, two component, 100% solids, zero VOC, epoxy primer that effectively stops moisture- related problems with all types of floor coverings. Enviro-Grip™ 404FC will reduce moisture vapor emission rates (MVER) of up to 25 lbs/1000 sqft per 24 hours (11.34 kgs/92.90 sqm) to below the limit of 3 lbs/1000 sqft (1.36 kgs/92.90 sqm) required by most finished flooring manufacturers.
Download Tech SheetEnviro-Grip™ Primer 121 is a two component (resin and hardener), fast drying, 92% solids, epoxy primer with low VOC and low odor. For use on concrete, wood, asphalt and modified bitumen. Please use the correct product grade that complies with VOC regulations as per federal, state, statutory bodies, county and city regulations/codes at the place of installation of product
Download Tech Sheet