CEMENTITIOUS GROUTS /EPOXY MORTARS

TuffDeck™ II

TuffDeck™ II Epoxy Mortar is a three-component, 100% solids, multi-purpose, high strength, and non-shrink epoxy patching mortar. The system combines a high-quality epoxy resin and curing agent with an engineered blend of graded aggregates. TuffDeck™ II is specifically engineered to provide superior patching while demonstrating similar physical characteristics to the concrete substrate.Please use the cor-rect product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Download Tech Sheet

TuffGrout™ 1107

TuffGrout™ 1107 is formulated for a wide variety of grouting applications, from plastic to fluid through a controlled, positive expansion. Designed to provide effective load bearing for high flow precision grouting applications. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Download Tech Sheet

TuffGrout™ NS

TuffGrout™ NS is a non-shrink, non-corrosive, non-metallic, multipurpose, cement based, flowable grout. TuffGrout™ NS is formulated for a wide variety of grouting applications, from damp pack to flowable through a controlled, positive expansion. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Download Tech Sheet

TuffGrout™ PM

TuffGrout™ PM Pointing Mortar is for pavers, adhered stone, thin brick, and manufactured masonry veneers. It is factory prepared and designed to be mixed with water. Formulated from a blend of high strength Portland cement, graded aggregates, and color-fast pigments. TuffGrout™ PM provides a joint that is dense, hard and durable. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Download Tech Sheet

TuffMax™

TuffMax™ Structural Epoxy Grout is a high performance, expansive, non-shrink, moisture insensitive, epoxy system for supporting equip-ment requiring precision alignment. It is a three component, 100% solids, solvent-free system formulated to exhibit high early strength combined with the highest creep resistance at elevated temperatures. TuffMax™ is suitable for grouting bases of numerous configurations and formulated to be used in both deep pours and thin or thick sections. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Download Tech Sheet

TuffSet TBM™

TuffSet™ TBM is specifically formulated to provide a single-step installation method for large format ceramic tile and stone. It fully supports heavy tiles and stone, reducing lippage problems and the need for leveling or pre-floating rough surfaces. TuffSet™ TBM was designed for use with TuffSet™ Admix to produce a latex portland cement mortar that has exceptional strength. TuffSet™ RTU Premixed is an approved substitute for TuffSet™ TBM mixed with TuffSet™ Admix. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

Download Tech Sheet